Okay here we go, wheels...
I have worked out its 110pcd and no one does these sorts of wheels unless your a QUAD or live in Japan / Malaysia. so the obvious answer is 108PCD ford on wobble nuts.
I also note the ET of 50 (considerings its only a 4" wheel) means I can go in 4" safely and possibly outwards but an Inch or so... Thrfore 5J or 5.5J ford figment alloys with as low ET number would seem the obvious choice...
Anyone want to throw ideas in of what they have fitted and or ideas for wheels
yes your correct, they are 4x110 pcd and the center board will 66.6mm i think as will be same hubs as miras.
You can use ford wheels with wobble bolts no problem, you will find it very hard to get a ford wheel with a offset like 50, they going to be around 38-42 so best stick with 4.5/5j max, you will also have to get the center boar machined out if proper ford wheels, most universal wheels will have a large enough center boar tho
you could try finding mk1 rx7 wheels or very early jap wheels in 4x110 but they mega hard to get hold of, dazran mite have few sets of wheels kicking around still that will fit as he had a few sets for his move. no doubt he will be along soon and comment
Yea I have sort of put my heart in a nice set of RX7 LUSHpuppies bit like these
Bit ironic as passed on a set last year whenI was looking for alloys for my GT
I'm away at JAE this weekend before kkitp so I will be leaving tomoz.
Here's some pics of ones I've got
2sets of these
These arnt this colour anymore and have excellent tyres on them.
I have a set of Harry hockley rally wheels but there heavily kerbed(not currently got pics)
And finally a set of 5 mega rare momo's in 4x110 stud pattern
All of these could ideally do with a respray/refurb due to laqure peel/rattle can paint.
The only ones with heavy kerbing is the rally wheels and one set of the Zato alloys.