emo EF-RL ECU Pin Out ~ **INCOMPLETE**

More
02 Jun 2011 00:12 #9771

Been busy with life lately & this is what I manage to do on spare time. Hopefully this will help us (EF-RL owners) to tapping the right wires for any electronic devices.

The pin out are incomplete, those with blue marks & ?? means I still didn't know what it is, while yellow marks with *none* is no connection/signal/input/output from/to the ECU. So if you know what is the connection/signal on blue marks pin out, please let me know. So I can make this diagram complete



*Gruss, hope this help you with emanage  :wave:

The following user(s) said Thank You: gt4uk

Please Log in or Create an account to join the conversation.

02 Jun 2011 11:03 #9781

I've set this as a sticky because I'm sure it will be very useful to other Mira owners!

Thank you for posting it
:happy:


Author of The Ruins of Rytus Series
Sample, purchase or find out more at:
www.RuinsofRytus.com

Connect with me:
Facebook
Twitter
LinkedIn

Please Log in or Create an account to join the conversation.

More
02 Jun 2011 19:13 #9788

I have some partial pinouts for the ef-jl

A)  1= ig. coil
      2= gd.
      3= injector #2 cylinder
    22= starter relay

B) 1=power steering speed sensor                 
    3= service port
    4= distributor
    5= knock sensor
    12= distributor
    13= 0x sensor
    14= intake sensor
    16= pressure sensor

Please Log in or Create an account to join the conversation.

More
02 Jun 2011 22:44 #9797

I have some partial pinouts for the ef-jl

A)  1= ig. coil
      2= gd.
      3= injector #2 cylinder
    22= starter relay

B) 1=power steering speed sensor                 
    3= service port
    4= distributor
    5= knock sensor
    12= distributor
    13= 0x sensor
    14= intake sensor
    16= pressure sensor

:thumb:
Thank you Sir...

Check it again & came out
A:
22= starter relay

B:
1= power steering
3= service port

Other than that not the same as ef-jl

Please Log in or Create an account to join the conversation.

More
02 Jun 2011 22:53 #9798

Hi there
I'll double check my pin outs tomorrow on my diagram, see if i've got any extra ones. Good work thogh so far on the diagram



oil and filter change *16/01/10 *27/08/10 *06/11/10 *16/04/11 *17/12/11 *17/03/12
Timing belt and tensioner and Alternator belt change 11/06/11

Please Log in or Create an account to join the conversation.

More
11 Jun 2011 14:08 #9937

Guys please put forward the JB-JL engine's ECU diagram like this...... I shall be very thankful to you  :smile:


WTM
CEO, World Tuned Machines Motorsports Inc.

Please Log in or Create an account to join the conversation.

More
11 Jun 2011 22:30 #9943

Actually not JB-JL.... I need it for JB-EL engine


WTM
CEO, World Tuned Machines Motorsports Inc.

Please Log in or Create an account to join the conversation.

More
11 Jun 2011 23:02 #9946

If you/someone can send me the ecu, I could try to read the pin out base on the circuit inside. Spare/broken/blow ecu will be just fine. :p

Please Log in or Create an account to join the conversation.

More
12 Jun 2011 11:31 #9953

Alright, I'll send you the pictures of my ECU


WTM
CEO, World Tuned Machines Motorsports Inc.

Please Log in or Create an account to join the conversation.

12 Jun 2011 11:46 #9954

I think Aid needs the ECU so he can test it, but I could be wrong.


Author of The Ruins of Rytus Series
Sample, purchase or find out more at:
www.RuinsofRytus.com

Connect with me:
Facebook
Twitter
LinkedIn

Please Log in or Create an account to join the conversation.

Moderators: TADOAdam Kenneydazran
Time to create page: 0.213 seconds
Powered by Kunena Forum